Juniper M10 Network Router

Juniper M10 Network Router: a high-performance network edge router with impressive packet handling capabilities

At TXO we stock a large selection of refurbished parts for the Juniper M10 Network Router, with many components available for fast shipping and delivery. We also offer a repair service for many components within the wider Juniper network. All replacement parts are guaranteed under our one year warranty. Get in touch with us today to find the parts you need.

Availability & shipping for the Juniper M10 Network Router

With a large range of parts available for the Juniper M10 network router, TXO can help you quickly find the parts you need. Most Juniper parts are dispatched immediately upon receipt of purchase order and delivered within 1-3 days in the UK and 3-5 days for international delivery. Contact us today to get an exact quote and estimated delivery times for your order.

About the Juniper M10 Network Router

The Juniper M10 is a network backbone router released by Californian networking company, Juniper Networks alongside the Juniper M5 as part of the M-Series of network backbone routers in September 2000. The M-Series also included other models such as the Juniper M20, M40 and M160. The Juniper M10 network router offered exceptional performance and flexible interfaces, all packed into a space- and power-efficient design. It leveraged the same architecture, such as ASICs, and JUNOS Internet software as the other M-series routers, helping to bring internet-tested core technology services such as packet filtering and sampling to a business network edge.

With the powerful Internet Processor II ASIC, the Juniper M10 router delivered wire-speed forwarding with ample expansion opportunities. It could achieve an impressive packet forwarding capacity of 10+ Gbps, making it well-suited for various applications, including high-speed access, peering, hosting, and high-end customer premise equipment (CPE) environments. Part of its ability to achieve these speeds came from splitting the functionality of the control plane and forwarding plane. The control plane forwarded packets to the required destination, whilst the forwarding plane determined the route of each packet. By dividing these functions, the Juniper M10 was able to avoid bottlenecks that would usually occur during packet handling.

The extensive range of supported interfaces, from T1 and E1 to OC-48c/STM-16, ensures a cost-effective and scalable solution for businesses that deployed this platform. The Juniper M10 utilised the ASIC-based rate limiting, filtering, and sampling features to facilitate the scalable deployment of services, equipping network operators with comprehensive tools to manage larger networks at higher bandwidths. The M10 could achieve this performance and functionality utilising just three rack units, making it the perfect network solution for businesses that needed maximum routing capacity whilst minimising the physical footprint.

The Juniper M10 placed great importance on user convenience, incorporating field-replaceable modules that helped to simplify maintenance. Network operators had the flexibility to add or replace essential components such as the routing engine, cooling system, PICs, power supply, craft interface, SCB, and FPC directly on-site, without disrupting the router’s operations. This level of adaptability made the Juniper M10 highly favoured among network operators by eliminating the necessity for expensive on-site engineer visits for troubleshooting or upgrades.

In July 2004 Juniper Networks announced the end-of-life for the M10 backbone router, with the effective date set for 31st January 2010. Following this time, Juniper ceased to offer support or technical assistance for the Juniper M10 router. Despite this TXO still continues to offer repairs and the procurement of replacement parts specifically for the Juniper M10 router and can continue to support you in keeping your existing Juniper networks operational. Contact us today to find out how we can help.

Juniper M10 component list

At TXO we have an extensive range of refurbished products and parts for the Juniper M10 Core router many of which can be ordered with fast shipping and delivery. A list of some of the most popular products can be found below, but please contact us if the part you require is not listed.

Part Number	Description
M10BASE-DC-E	Juniper M10 Internet Backbone Router Base 8 x PIC 1 x Forwarding Engine Board 1 x Performance Routing Engine
M10-CHASSIS	Juniper M10 Chassis. No routing engine. No boards.
FEB-M10	Forwarding engine for the Juniper M10 Core Network Router
M10BASE-DC	M10 base unit, DC Power; eight-PIC slot chassis, two built-in FPCs, cooling, midplane, Forwarding Engine Board (with Internet Processor II ASIC, 8-MB SSRAM), 1 DC power supply, complete documentation (CD ROM).
M10BASE-AC	M10 base unit, AC Power; eight-PIC slot chassis, two built-in FPCs, cooling, midplane, Forwarding Engine Board (with Internet Processor II ASIC, 8-MB SSRAM), 1 AC power supply (AC power cables are country specific and sold separately), complete documentation (CD ROM).
RE-333-256	Routing Engine (333-MHz mobile Pentium II, 256-MB DRAM, 80-MB Flash Disk, 6.4-GB hard drive, JUNOS software for the USA and Canada)
RE-333-768	Routing Engine (333-MHz mobile Pentium II, 768-MB DRAM, 80-MB Flash Disk, 6.4-GB hard drive, JUNOS software for the USA and Canada)

Repair capability for Juniper M10

TXO believes in supporting the circular economy and helping reduce the environmental impact of the telecoms sector. We therefore offer a full third-party repair service that aims to refurbish and repair as many parts and components for Juniper networking equipment as possible.

We have an experienced team of highly qualified systems engineers who complete over 12,000 repairs every year operating from our advanced engineering facilities in Solihull. With years of experience conducting repairs on many components for the Juniper M10 Network router, they have an in-depth knowledge of core telecoms repairs including optical, IP and radio-based technologies and can offer expert support on maintaining your existing systems and help prevent unnecessary downtime.

As part of our expert service, we will often carry out pre-emptive repairs on Juniper components that are known to experience faults, therefore preventing the need for future repairs, further costly downtime and additional disruption to your business. We are also able to offer an advance replacement service, to deliver you parts prior to an on-site repair being conducted meaning you can maintain optimum service levels to your customers.

Check out the full list of platforms that we repair.

Technical specifications for the Juniper T1600 Core Router

The table below gives the technical specifications of the Juniper M10 Router, please contact us for more in-depth information.

Specification	Description
Physical	5.25 in / 13.33 cm
Height	17.4 in / 44.2 cm
Width	24 in / 60.96 cm
Depth	65 lbs / 29.5 kg
M10 Weight	Front or center rack mount
Mounting	■ M5 throughput of 6.4 Gbps half duplex ■ M10 throughput of 12.8 Gbps half duplex ■ 266-MHz CPU and supporting logic ■ Internet Processor II ASIC (40 Mpps forwarding performance) ■ Two Distributed Buffer Manager ASICs for coordinating pooled, single-stage buffering ■ One (M5 router) or two (M10 router) I/O Manager ASICs for wire-rate parsing, prioritizing, and queuing of packets ■ Four banks of 2-MB SRAM for forwarding tables associated with ASICs ■ 64-MB DRAM storage for the microkernel ■ Two 512-KB boot flash EPROM (programmable on the board)
Routing Engine	■ 333-MHz mobile Pentium II with integrated 256-KB Level 2 cache ■ 256-MB or 768-MB of ECC SDRAM memory ■ 80-MB compact flash drive for primary storage ■ 6.4-GB IDE hard drive for secondary storage ■ 110-MB flash PC card for tertiary storage ■ 10/100 Base-T auto-sensing RJ-45 Ethernet port for out-of-band management ■ Two RS-232 (DB9 connector) asynchronous serial ports for console and remote management
DC Power Requirements
M10 Power Supply	434 watts maximum output
Input Voltage	–42.5 to –72 VDC operating range
Input Current	13.5 A at –48 VDC
AC Power Requirements	M5 Power Supply
M10 Power Supply	434 watts maximum output
Input Voltage	100 to 264 VAC operating range
Input Line Frequency	47 to 63 Hz, autoranging
	Input Current
Environmental	Temperature
Temperature	32 to 104 degrees F / 0 to 40 degrees C
Maximum Altitude	No performance degradation to 10,000 ft / 3,048 m
Relative Humidity	5 to 90 percent noncondensing
Seismic/Earthquake	Designed to meet Bellcore Zone 4 requirements
Thermal Output	2,550 BTU/hour
Agency Approvals
Safety	■ CSA C22.2 No. 950 ■ * UL 1950 ■ EN 60950, Safety of Information Technology Equipment ■ EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification, Requirements and User’s Guide ■ EN 60825-2 Safety of Laser Products - Part 2: Safety of Optical Fibre Communication Systems
EMC	■ AS 3548 Class A (Australia) ■ EN 55022 Class A emissions (Europe) ■ FCC Class A (USA) ■ VCCI Class A (Japan)
Immunity	■ EN 61000-3-2 Power Line Harmonics ■ EN 61000-4-2 ESD ■ EN 61000-4-3 Radiated Immunity ■ EN 61000-4-4 EFT ■ EN 61000-4-5 Surge ■ EN 61000-4-6 Low Frequency Common Immunity ■ EN 61000-4-11 Voltage Dips and Sags
NEBS	Designed to meet these standards ■ GR-63-Core: NEBS, Physical Protection ■ GR-1089-Core: EMC and Electrical Safety for Network Telecommunications Equipment ■ SR-3580 NEBS Criteria Levels (Level 3 Compliance)
ETSI	■ ETS-300386-2 Switching Equipment